The OXVA VPrime 2 Pod Vape Kit combines the simplicity of a refillable pod system with the power and airflow of a compact RDL/DTL device. It features a large 3400mAh built-in battery, adjustable 5-60W output, inhale or button activation, a 0.98-inch colour screen and fast 5V/3A USB-C charging. The UK kit includes two TPD-compliant 2ml VPrime Dual Mesh pods: a 0.4Ω pod for a warmer, airier vape and a 0.6Ω pod for a slightly cooler, more restricted draw.

Designed for adult users who want more performance than a low-power MTL pod, the VPrime 2 adds OXVA's UniTech 3.0 dual-mesh platform, adjustable side airflow and selectable Boost and Eco modes. Explore more OXVA vape kits and pods, or compare it with other refillable pod kits available from UK Vape Kings.

OXVA VPrime 2 at a glance

• 3400mAh built-in rechargeable battery
• Adjustable 5-60W power output
• Two UK 2ml VPrime Dual Mesh pods included
• 0.4Ω and 0.6Ω UniTech 3.0 pod options
• Boost mode for dual-mesh performance
• Eco mode for a more efficient single-mesh output
• Fast, responsive auto-draw plus manual fire-button activation
• 0.98-inch colour display with three interface themes
• Adjustable side airflow for RDL and DTL draws
• USB-C charging rated at 5V/3A
• Side-fill pod design
• No e-liquid or nicotine included

A 3400mAh, 60W pod kit built for RDL and DTL

The VPrime 2 is aimed primarily at restricted-direct-lung and direct-to-lung vaping. Its 5-60W adjustable output gives you room to fine-tune warmth and vapour production, while the side airflow control lets you move between a more restricted inhale and a more open draw. It is a practical step up for adult vapers who have outgrown basic fixed-output pod devices but do not want the size or separate batteries of a traditional box-mod kit.

The built-in 3400mAh battery is 800mAh larger than the original VPrime's 2600mAh cell. OXVA rates the charging input at 5V/3A and states that the battery can reach approximately 50% in 20 minutes when used with a suitable power source and cable. Actual charging time varies with the charger, cable, temperature and remaining battery level.

You can activate the device by inhaling or by pressing the fire button. OXVA quotes an auto-draw response as fast as 0.01 seconds, so the device is designed to react quickly even with the more open airflow used for RDL and DTL vaping. Prefer manual control? Use the button instead.

VPrime Dual Mesh pods: 0.4Ω or 0.6Ω?

Both included pods use built-in coils, so there is no separate coil to install. Fill the pod, allow the coil to saturate and replace the complete pod when flavour or vapour production noticeably declines. Use the table below as a starting point and follow the wattage information shown on the pod, packaging and device screen.

Shop 50/50 e-liquids for the 0.6Ω pod, or browse 70/30 e-liquids and 100ml shortfills for suitable lower-nicotine options with the 0.4Ω pod. Because the included pods operate at RDL/DTL power levels, select a nicotine strength appropriate to higher vapour output and follow the e-liquid manufacturer's guidance. This kit is not supplied with e-liquid or nicotine.

Boost and Eco modes explained

The new VPrime Dual Mesh cartridge is designed to work in two ways when paired with the VPrime 2:

• Boost mode: activates the dual-mesh configuration for a warmer, denser and more powerful output.
• Eco mode: uses a more efficient single-mesh operation to reduce power demand and support longer battery and pod use.

Boost and Eco let you change the character of the same pod without rebuilding or swapping a separate coil. Boost suits users who prioritise stronger output, while Eco is the more conservative choice for routine use.

UK 2ml version and VPrime pod compatibility

UK Vape Kings supplies the UK TPD version with a 2ml e-liquid capacity.

The new 0.4Ω and 0.6Ω VPrime Dual Mesh cartridges are physically compatible with both the original VPrime and the VPrime 2. Original-generation VPrime cartridges can also fit the VPrime 2, but operating-mode availability differs. For the complete Boost and Eco experience on the VPrime 2, use the new UniTech 3.0 VPrime Dual Mesh cartridges.

Browse our replacement pods collection for compatible spares. The dedicated VPrime pod page should clearly identify whether a variant is an original UniTech 2.0 cartridge or a new UniTech 3.0 Dual Mesh cartridge before purchase.

Colour screen, adjustable airflow and anti-misfire protection

A 0.98-inch colour display presents the selected wattage, battery level, pod resistance and operating mode. Three interface themes allow the display to be personalised without changing the core controls. The device also includes adjustable side airflow, making it easier to tune the draw to the chosen pod and power level.

For additional carrying protection, OXVA states that the VPrime 2 can automatically lock after three accidental button presses. Always switch off or lock the device before placing it in a pocket or bag, keep it away from keys and coins, and inspect the pod and charging port before use.

OXVA VPrime 2 vs the original VPrime

The VPrime 2 keeps the same 60W ceiling but adds a larger battery, faster charging input, a slightly larger screen and the new dual-mesh operating system. Read our OXVA vs Vaporesso guide for a broader look at refillable pod platforms.

How to set up the OXVA VPrime 2

1. Remove the pod and open the side-fill seal.
2. Fill through the e-liquid port, avoiding the central airflow chimney.
3. Close the seal firmly and wipe away any liquid.
4. For a new pod, wait at least five minutes before vaping so the coil can saturate.
5. Insert the pod, start near the lower end of its recommended wattage range and adjust gradually.
6. Fine-tune the side airflow and choose Eco or Boost mode to suit the draw.

Do not allow the pod to run completely dry. Refill when the liquid is low, and replace the pod if the flavour becomes muted, the vapour drops noticeably or a burnt taste develops.

Who is the VPrime 2 for?

• Adult users seeking a compact RDL or DTL refillable pod kit
• Existing VPrime users who want a larger battery and the new dual-mesh modes
• Users who prefer the choice of auto-draw and button activation
• Users who want adjustable wattage and airflow without external batteries
• Users choosing between a powerful pod system and a compact advanced vape kit

The included 0.4Ω and 0.6Ω pods are primarily intended for RDL/DTL use. Customers seeking a tight, low-power MTL draw should compare lower-output devices and read the UK Vape Kings MTL vs DTL guide before selecting a kit.

OXVA VPrime 2 specifications

Available colours

• Mirage Blue
• Mirage Purple
• Mirage Pink
• Black Carbon
• Shard Black
• Shard Gold

What is in the box?

• 1 x OXVA VPrime 2 device
• 1 x 2ml VPrime Dual Mesh 0.4Ω pod, pre-installed
• 1 x 2ml VPrime Dual Mesh 0.6Ω pod
• 1 x USB-C charging cable
• 1 x user manual
• 1 x use suggestion card

Please note: e-liquid and nicotine are not included.

Care and safety

• For adults aged 18 and over only.
• This is an electronic vaping device, not a tobacco product.
• Do not use if the device, pod, cable or charging port is damaged.
• Keep the device dry and away from extreme heat, direct sunlight, children and pets.
• Use a suitable 5V USB power source and an approved USB-C cable. Do not charge unattended.
• Clean condensation from the pod contacts with a dry tissue.
• Recycle the device and built-in battery through an appropriate WEEE or battery collection point.

OXVA VPrime 2 frequently asked questions

Does the UK OXVA VPrime 2 have a 2ml or 6ml pod?

The UK TPD version supplied by UK Vape Kings uses 2ml pods.

Which pods are included?

The UK kit includes one 2ml 0.4Ω VPrime Dual Mesh pod and one 2ml 0.6Ω VPrime Dual Mesh pod.

What is the difference between the 0.4Ω and 0.6Ω pods?

The 0.4Ω pod is the warmer, airier option and is listed at 28-38W. The 0.6Ω pod gives a cooler, slightly tighter RDL draw and is listed at 20-25W.

Do original VPrime pods fit the VPrime 2?

Yes. The cartridge generations are physically cross-compatible, but mode availability differs. Use the new VPrime Dual Mesh cartridges to access both Boost and Eco modes on the VPrime 2.

Is the OXVA VPrime 2 an MTL kit?

The two included dual-mesh pods are primarily intended for RDL and DTL vaping. It is not the most natural choice for someone seeking a very tight, low-power MTL draw.

What e-liquid should I use?

The 0.6Ω pod is best matched with 50/50 e-liquid. The 0.4Ω pod can be used with compatible 50/50 or 70/30 e-liquid. Choose a nicotine strength suited to the higher vapour output of RDL/DTL vaping.

Does the kit contain nicotine?

No. The device and pods contain no nicotine, and no e-liquid is included.

How powerful is the VPrime 2?

The output is adjustable from 5W to 60W.

How large is the battery?

The device has a 3400mAh built-in battery.

How fast does it charge?

The charging input is rated at 5V/3A. OXVA states that approximately 50% can be reached in 20 minutes with suitable charging equipment, although real charging time varies.

Can I use inhale activation?

Yes. The VPrime 2 supports both auto-draw and manual fire-button activation.

Does it have adjustable airflow?

Yes. A side airflow control lets you make the draw more restricted or more open.

Is there a fixed puff count?

No. This is a refillable rechargeable device, so there is no fixed advertised puff count. Usage depends on power, pod, airflow, draw length, e-liquid and battery condition.

How long should I prime a new pod?

After the first fill, wait at least five minutes before vaping. Starting at the lower end of the recommended wattage range can also help the new coil settle in.

Dispatch Cut-Off Times

• Monday–Friday | Order by 3 pm for same-day dispatch | Orders after 3 pm dispatched next working day
• Saturday | Order by 11 am for Saturday dispatch | Orders after 11 am dispatched Sunday
• Sunday | All Sunday orders are dispatched Monday

Delivery Services

• Royal Mail Special Delivery Guaranteed Next Day
• Royal Mail Special Delivery Next Day (1 PM) | Signature Required
• Royal Mail Special Delivery Next Day (9 AM) | Signature Required
• Royal Mail Tracked 24 1–2 working days
• Saturday if ordered by Friday 3 pmYes, signature required

Express Free Next Day Delivery

Express Free Next Day Delivery is available on all orders over £300. Select your preferred service at checkout.

Click & Collect

• Choose Click & Collect at checkout and pick up in store:By 3 pm Mon–Fri → ready same dayAfter 3 pm Mon–Fri, or weekend orders → ready next working day

Tracking & Notifications

• As soon as your order is dispatched, we’ll email you a tracking number.
• You can also view status updates any time by logging into your account.

Need Help?

If you have any questions about cut-offs, services, or availability, please email us at info@ukvkwholesale.com or call 0116 402 8181. We’re here to help!